Refractory castables
HOT
Zirconium corundum castables
- Minimum order amount: 1 ton
- Аl2О3: 45% — 55%
- ZrO2: 12% -24%
- Refractoriness：≥1480 — 1600℃
RequestSend
HOT
Mullite corundum castable
- Minimum order amount: 1 ton
- Al2O3: 72% - 85%
- Fe2O3: ≤1.0 -1.5%
- Refractoriness: ≥1700℃
RequestSend
HOT
SBC mix
- Minimum order amount: 1 ton
- Al2O3: 90%
- Fe2O3: ≤1%
- Refractoriness: ≥1800℃
RequestSend
HOT
VGBS mix
- Minimum order amount: 1 ton
- Аl2О3: ≥70% — 85%
- Density: ＞2.6-2.9g/cm3
- Operating temperature: ≥1550 - 1600℃
RequestSend
HOT
Silicon Carbide Castables
- Minimum order amount: 1 ton
- SiC: 80%
- SiO2: ≤10,5%
- Refractoriness: ≥1600℃
RequestSend
HOT
Огнеупорный Бетон ТИБ
- Minimum order amount: 1 ton
- Bulk density: 0.5 - 1.8 g / cm3
- Compressive strength: ≥1.5 -30MPa
- Operating temperature:≥1150 — 1350℃
RequestSend
HOT
Wear-resistant castables
- Minimum order amount: 1 ton
- Аl2О3: ≥75% — 85%
- Density: ＞2.6 -2.9g/cm3
- Operating temperature: ≥1500-1600℃
RequestSend
HOT
Low Cement Castables
- Minimum order amount: 1 ton
- Аl2О3: 45% — 95%
- SiO2: ≤2,0 -50%
- Refractoriness：≥1400 — 1700℃
RequestSend
Ramming Mass
HOT
AZS Ramming Mass
- Minimum order amount: 1 ton
- Al2O3: 45% — 50%
- ZrO2: 29% — 33%
- Refractoriness: ≥1650℃
- Bulk density: ≥2.95g/cm³
RequestSend
HOT
Magnesia Ramming Mass
- Minimum order amount: 1 ton
- MgO: ≥90%
- Refractoriness：≥1730℃
- Humidity: ≤1.0%
- Sample: sample testing available
RequestSend
HOT
Silica Ramming Mass
- Minimum order amount: 1 ton
- SiO2: 90%
- Refractoriness：1750℃
- Density: 2 g/cm³
- Cold compressive strength: ≥10 MPa
RequestSend
Refractory mortar
HOT
Мертель Шамотный МШ
- Minimum order amount: 1 ton
- Аl2О3: 28% — 42%
- Fe2O3: ≤1.6% — 2,5%
- Массовая доля влаги: ≤5%
- Огнеупорность: ≥1650℃ — 1730℃
RequestSend
HOT
Mertel MML-62
- Minimum order amount: 1 ton
- Аl2О3: 62%
- Fe2O3: ≤1.5%
- Refractoriness：≥1730℃
- Массовая доля влаги: ≤5%
RequestSend
HOT
Мертель ММК
- Minimum order amount: 1 ton
- Аl2О3: ≥72% — 90%
- Fe2O3: ≤0,9% — 2,5%
- Огнеупорность: ≥1770℃
- Массовая доля влаги: ≤2% — 5%
RequestSend
HOT
Динасовый мертель МД
- Minimum order amount: 1 ton
- SiO2: ≥90% — 94%
- Аl2О3: 2,0% — 6,0%
- Огнеупорность: ≥1500-1650℃
- Sample: sample testing available
RequestSend
Refractory cement
HOT
Alumina cement
- Minimum order amount: 1 ton
- Al2O3: 30-50
- CaO: 35-45%
- Refractoriness: ≥1580°С
RequestSend
HOT
High alumina cement
- Minimum order amount: 1 ton
- Al2O3: 60-80%
- Fe2O3: 0,5-1,0
- Refractoriness：1580-1750°С
RequestSend
Другие
HOT
Refractory Plastic Castable
- Al2O3: 37 – 80%
- Density: ≥1.4-2.4g/cm3
- Влаги: 9% – 17%
- Refractoriness: ≥1700℃
RequestSend
HOT
Gunning Mix
- Al2O3: ≥28%
- MgO: ≥82 -86%
- Fe2O3: ≤1.5%
- Огнеупорность: ≥1680℃
RequestSend
Technological scheme of mixture production
Installation of unshaped refractories
Preparation
- Qualification and readiness for installation is required to inspect the furnace design.
- Tidy up the surrounding work environment so that it is neat and tidy.
- To prepare for the use of appropriate facilities, tools and materials.
Installation Manual
- Please read the installation manual carefully before starting work.
- Check the material ratio before installation to make sure everything is ready.
- Install according to the user manual until the procedure is completed.
Baking liner
- When firing, follow the heating curve and avoid rapid heating.
- During the kiln firing process, the principle of slow heating and no cooling should be followed.
- When firing, proper ventilation must be maintained to facilitate the removal of moisture.
Kerui Refractory Product Certification
Kerui Refractory implements strict product quality control and quality inspection system. Kerui Refractory has many certificates such as ISO, CE and SGS etc. Our products such as refractory brick, thermal insulation material, refractory mixture for injection molding and so on meet international standards and requirements for quality, safety and performance. Kerui products are trustworthy.
- Kerui Refractory quality control
- Kerui Refractory quality assurance system
Kerui Refractory is trustworthy
Kerui has a professional team of talented workers, perfect service system, clear production process, strict quality control system. Kerui products are sold domestically and exported to Russia, Italy, France, Spain, Turkey, Bahrain, Korea and other international markets, and have won the unanimous praise of users.
